英语翻译The main problem remaining with utilizing wetsteam with screw expanders therefore lies only withthe large size of machine needed to expand tolow condensing temperatures.However,this can belargely overcome by raising the condensing tempera

来源:学生作业帮助网 编辑:作业帮 时间:2024/04/29 19:17:15

英语翻译
The main problem remaining with utilizing wet
steam with screw expanders therefore lies only with
the large size of machine needed to expand to
low condensing temperatures.However,this can be
largely overcome by raising the condensing temperature
to approximately 100 ◦C or more.At this
value,the vapour pressure of steam is just over
1 bar and,although less than that of the most commonly
used refrigerants and hydrocarbon working
fluids at the same temperature,is of comparable
value.

利用湿剩余的主要问题
螺杆膨胀机蒸汽因此就在于
需要扩大机的大尺寸
低冷凝温度.然而,这可以
通过提高冷凝温度在很大程度上克服
约100◦C或更多.在这
值,蒸汽的蒸汽压力超过
1条,虽然低于最常用的
用于制冷剂和油气工作
在同一温度的流体,是可比的价值

The main problem remaining with utilizing wetsteam with screw expanders therefore lies only withthe large size of machine needed to expand tolow condensing temperatures. However, this can belargely ov...

全部展开

The main problem remaining with utilizing wetsteam with screw expanders therefore lies only withthe large size of machine needed to expand tolow condensing temperatures. However, this can belargely overcome by raising the condensing temperatureto approximately 100 ◦C or more. At thisvalue, the vapour pressure of steam is just over1 bar and, although less than that of the most commonlyused refrigerants and hydrocarbon workingfluids at the same temperature, is of comparablevalue.

收起

与利用湿剩下的主要问题
因此,蒸汽与螺杆膨胀机仅在于用
机的大尺寸需要扩展到
低冷凝温度。然而,这可以是
很大程度上克服通过提高冷凝温度
到约100◦℃以上。在这
值时,蒸汽的蒸汽压力是刚刚超过
1巴,虽然低于最常用
使用的制冷剂和碳氢化合物的工作
液在相同温度下,是可比较的
值。...

全部展开

与利用湿剩下的主要问题
因此,蒸汽与螺杆膨胀机仅在于用
机的大尺寸需要扩展到
低冷凝温度。然而,这可以是
很大程度上克服通过提高冷凝温度
到约100◦℃以上。在这
值时,蒸汽的蒸汽压力是刚刚超过
1巴,虽然低于最常用
使用的制冷剂和碳氢化合物的工作
液在相同温度下,是可比较的
值。

收起

剩余的主要问题是利用螺杆膨胀机的湿蒸汽,因此只有大尺寸的机器需要扩大低冷凝温度机。然而,这可以通过提高冷凝温度约100◦C或更高在很大程度上克服。在这关键中,蒸汽的蒸汽压力是仅高于一杆的,但低于最常用的制冷剂和油气的工质在相同温度下,是可比较的价值。...

全部展开

剩余的主要问题是利用螺杆膨胀机的湿蒸汽,因此只有大尺寸的机器需要扩大低冷凝温度机。然而,这可以通过提高冷凝温度约100◦C或更高在很大程度上克服。在这关键中,蒸汽的蒸汽压力是仅高于一杆的,但低于最常用的制冷剂和油气的工质在相同温度下,是可比较的价值。

收起

main problem 求翻译:The main problem lies in the actual stuff of language itself-words. 英语翻译However,the tuning ofFuzzy-like PD controllersystems is a fundamental problem,specially for opti-mum performance.There are two main different aspectsin the design ofFuzzy-like PD controllers.By using MFs in the input and singletons in the 英语翻译the problem 后面3空格 英语翻译I_____that the beautiful _______will____me_____all my problem 英语翻译翻译What is the passage mainly about?(2)What is the main problem being discussed in the passage?(3)What is the main idea of this passage?(4)The passage is mainly about________.(5)Which of the following may be the best title for the pass The main problem was in that i always thought in chinese.看哪有错! 英语翻译The main problem remaining with utilizing wetsteam with screw expanders therefore lies only withthe large size of machine needed to expand tolow condensing temperatures.However,this can belargely overcome by raising the condensing tempera 英语翻译1.The role of corporate culture in the success of M&A operationsBased on a review of the main analyses,both theoretical and empirical,three main approaches to viewing the problem of successfully carrying out M&A operations can be identifi the main 英语翻译What is the main idea of the memorandum 英语翻译The main unit contains all the computers electronics. 英语翻译 Note down the main points of the speech.谢谢 Australia's main problem is water. the main problem with my English was in that I always tried to translate everything into Chinese改错题哟. This problem is from the main one since they are so closely related to each other.(separate 英语翻译The main constraint of this analysis is obvious 英语翻译The Main orebody is divided into a Main section and a Footwall section.怎么翻译?Main orebody 和 Main section 有什么区别?