关于matlab,simulink仿真问题,一直有Error in fun (line 2) k=x(1);,调用lsqcurvefit就出错open_system('sim1');sim('sim1');load dataty.mat;x0=[1,2,2];t=out(1,:);y=out(2,:);x=lsqcurvefit('fun',x0,t,y);plot(t,fun(x,t),'-',t,y,'-*');function y=f
来源:学生作业帮助网 编辑:作业帮 时间:2024/05/31 07:00:53
关于matlab,simulink仿真问题,一直有Error in fun (line 2) k=x(1);,调用lsqcurvefit就出错
open_system('sim1');
sim('sim1');
load dataty.mat;
x0=[1,2,2];
t=out(1,:);
y=out(2,:);
x=lsqcurvefit('fun',x0,t,y);
plot(t,fun(x,t),'-',t,y,'-*');
function y=fun(x,t)
k=x(1);
zeta=x(2);
omega=x(3);
s1=-zeta.*omega+omega.*sqrt(zeta.^2-1);
s2=-zeta.*omega-omega.*sqrt(zeta.^2-1);
if zeta>1
y=k*(1+(s2.*exp(s1.*t)-s1.*exp(s2.*t))/(s1-s2));
elseif zeta==1
y=k*(1-exp(-omega.*t)-omega.*t.*exp(-omega.*t));
elseif zeta>0&&zeta
你这个function没 end或者结束语句
其它看不出来,没有完整的仿真文件等,没法判断
matlab里的Simulink仿真中sum元件怎么关于X轴对称
matlab中simulink 如何设置仿真步距
关于matlab/simulink仿真过程出现的问题!仿真时出现仿真诊断“Derivative input 1 of 'wenya_filer/Transfer Fcn'(文件名) at time 0.2686788627406385 is Inf or NaN.Stopping simulation.There may be a singularity in the solution.If
matlab/simulink里面如何仿真恒功率负载?matlab/simulink仿真电子电子拓扑,需要有恒功率负载,如何模拟恒功率负载呢,或者说matlab/Simulink里面有没有非线性电阻呢?
matlab仿真惯性环节(1/Ts+1)在Simulink如何表示
matlab/Simulink仿真怎么设置能让横坐标表示为电压,纵坐标为电流
如何截取matlab图simulink仿真后得曲线图,如何截取,改背景色等
如何查看MATLAB中simulink仿真曲线的超调量、调节时间等参数?
怎样用Matlab/Simulink仿真出可变电感和可变电阻的模块?小弟急用,另有重谢!
论文翻译The first one is more appropriated in describing the power system as it is physically论文是 关于 matlab/simulink 光伏逆变器仿真Two kinds of graphical software are considered forstudying control of system with power electronics
我在书上看到一个MATLAB中Simulink,关于微分方程系统的小例子.Integrator的初始值为100,仿真时间1S最终的图像代表什么意思,刻度不懂微分方程系统是x'=x-0.5x^2
simulink仿真中的问题我在用MATLAB中的SIMULINK做仿真时出现以下错误提示,Trouble solving algebraic loop containing 'chap5_1sim/TmpHiddenBuffer_Feeding_S-Function_AtInput1' at time 3400. Stopping simulation. There may be a singula
simulink仿真图怎样弄进world
simulink仿真中怎么加入死区
Simulink常微分方程建模仿真问题
如何做关于LTE功率控制的matlab仿真
如何让用MATLAB Simulink产生m序列和Gold序列如题,并且要做出他们的相关性仿真.急!牛X的大哥,帮忙看看
用MATLAB的simulink仿真时显示波形是的范围怎么设置y的范围可以设置,咋的x的范围就不能设置呢?