英语翻译A section of tube approximately 100 mm in length shall be split longitudinally,90° on each side of the weld,and the sample opened and flattened with the weld at the point of maximum bend.

来源:学生作业帮助网 编辑:作业帮 时间:2024/05/30 18:06:05

英语翻译
A section of tube approximately 100 mm in length shall be split longitudinally,90° on each side of the weld,and the sample opened and flattened with the weld at the point of maximum bend.

把管子纵向劈开约100毫米长度,用火(焊枪)加热后,将劈开的两半各向外弯90度,然后,用火在弯角处加热后展开,凿平,

一段每个焊接端90°纵向两侧的打开,最大弯曲处焊接点磨平的,100mm 的样品管。

将一端长度大约100mm的管纵向劈开,与焊道每边成90°,在最大折弯点用焊接方法割开并整平

一段管长度大约100毫米应当在90°,分裂的纵向焊缝两侧的打开,与样品被夷为平地的点与焊接时的最大弯曲。